新疆石油地质 ›› 2011, Vol. 32 ›› Issue (4): 429-430.

• 油气工程地质 • 上一篇    下一篇

马朗凹陷玄武岩层特性与钻头选型

吴惠梅1, 楼一珊1, 张勇2, 刘云鹤3   

  1. 1.长江大学石油工程学院湖北省油气钻采工程重点实验室,湖北荆州 434023;
    2.中国石油西部钻探工程公司吐哈钻井公司,新疆鄯善 838200;
    3.长庆实业集团公司,西安 710021
  • 收稿日期:2010-11-20 出版日期:2011-08-01 发布日期:2020-08-19
  • 作者简介:吴惠梅(1982-),女,湖北孝威人,博士,石油工程,(Tel)13872312350(E-mail)wuhuimei@126.com.

Basalt Feature and Bit Type Selection in Malang Sag

WU Hui-mei1, LOU Yi-shan1, ZHANG Yong2, LIU Yun-he3   

  1. 1. Hubei Province Key Laboratory of Petroleum Drilling Recovery Engineering, School of Petroleum Engineering, Yangtze University, Jingzhou, Hubei 434023, China;
    2. Tuha Drilling Company, Xibu Drilling Engineering Co. Ltd., CNPC, Shanshan, Xinjiang 838200, China;
    3. Changing Industrial Group Compay; Xi'an, Shanxi 710021, china
  • Received:2010-11-20 Online:2011-08-01 Published:2020-08-19

摘要: 马朗凹陷二叠系以下的火成岩以玄武岩为主,地层耐研磨性强、可钻性差,钻井过程中钻速低。对取自现场的岩心进行可钻性试验,建立了岩石可钻性模型,计算了牙轮钻头与PDC 钻头可钻性级值,并结合钻头的结构特点进行了钻头优选。结果表明,对于该地区二叠系以下低钻速的玄武岩地层,选用推荐的钻头与其他钻头相比,机械钻速提高了50%以上,缩短了钻井周期,达到了优质快速钻井的目的,对玄武岩地层钻头选型具有重要的指导意义。

关键词: 三塘湖盆地, 马朗凹陷, 玄武岩, 可钻性, 钻头优选

Abstract: The main lithology of the igneous rocks under the Permian in Malang sag is basalt with the characteristics of strong abrasion resistance, low drillability and low drilling rate. This paper tests the drillability of the cores from the field, develops rock drillability model, computes the drillability grade of cone bit and PDC bit and optimizes the bit according to the bit structural features. The results indicate that in light of the basalt strata under Permian, using recommended bit has increased the mechanical drilling rate by 50% compared with other bits, shortened the drilling cycle, and attained the aim of excellent and fast drilling.

Key words: Santanghu basin, Malang sag, basalt, drillability, bit optimization

中图分类号: