新疆石油地质 ›› 2005, Vol. 26 ›› Issue (2): 202-205.

• 应用技术 • 上一篇    下一篇

生烃模拟结果的校正

高岗1, 柳广弟1, 王兆峰2   

  1. 1.石油大学,北京 102249;
    2.中国石油 新疆油田分公司 勘探开发研究院,新疆 克拉玛依 834000
  • 收稿日期:2004-07-14 出版日期:2005-04-01 发布日期:2020-08-24
  • 作者简介:高岗(1966-),男,陕西高凌人,副教授,煤FHI油气地质与勘探,(Tel)010-89734162.

Correction of Results from Hydrocarbon-Generating Simulation

GAO Gang1, LIU Guang-di1, WANG Zhao-feng2   

  1. 1. University of Petroleum, Beijing 102249, China;
    2. Research Institute of Exploration and Development, Xinjiang Oilfield Company,PetroChina, Karamay, Xinjiang 834000, China
  • Received:2004-07-14 Online:2005-04-01 Published:2020-08-24

摘要: 根据Ⅱ2型湖相泥岩的加水热模拟实验结果与油气生成一般规律的研究,提出了热模拟结果应用于含油气盆地的生油气量计算的校正方法。认为各种怪源岩样品的热模拟实验结果与实际的油气生成模式均有一定偏差咱不能直接应用于盆地炬源岩的生油气量计算。在校正时选1%作为生油高峰对应的镜质体反射率(R。),在不同盆地或对于不同类型炬源岩可能有所不同,应根据某一盆地的怪源岩实测演化剖面来选定生油高峰对应的R。,由干生炬机理上氢气与甲炕没有明显的联系,指出总气态产物中的氢气不应作为炬气的一部分计算噜必须根据校正后的R。建立油气产率的数学模型和编制相应的困版。

关键词: 油气生成, 热模拟, 资源评价, 数学模型

Abstract: Base on thermal simulation experiment of lacustrine mudstone of Type 112 and petroleum generation pattern, this paper propos-es the correction method for estimation of hydrocarbon generating quantity in oil gas bearing basin from the thermal simulation result. It is suggested that these thermal simulation result can not directly be used to estimate the quantity due to presence of certain errors compared with real hydrocarbon-generating patterms. The sclection of vitrinite reflectance at oil generating peak when correction should be based on measured source rock evolutive section in a basin for different basins or different source rocks have somewhat different vitrinite re-flectance. In addition, no distinct relationship between hydrogen and methane in hydrocarbon-generating mechanism means that estimation of gas quantity should exclude hydrogen in gross gaseous hydrocarbons. Corrected vitrinite rellectance has to be adopted to develop mathematic models for oil-gas production rate and related charts.

Key words: hydrocarbon generation, thermal simulation, resource evaluation, mathematic model

中图分类号: