Xinjiang Petroleum Geology ›› 2010, Vol. 31 ›› Issue (6): 647-648.

Previous Articles     Next Articles

Experiment on Capillary Pressure Determination with MNR and Semi-Permeable Plate

ZHANG Shi-qing, dAI Shi-hua, ZHANG Xiao-liang, CHEN Ling, SAI Fei-ya   

  1. Well Logging Company, Xibu Drilling Engineering Company Ltd., PetroChina, Karamay, Xinjiang 834000, China
  • Received:2010-03-26 Revised:2010-07-28 Published:2021-01-18

Abstract: This paper discusses the method for obtaining formation capillary pressure from MNR T2 spectrum by mercury penetration and semi-permeable plate experiment to determine the capillary pressure curve and further calibrate the MNR capillary pressure. Over 50 core samples from Jungar basin are tested with MNR and semi-permeable plate. Correlation between MNR T2 spectrum and aperture distribution is conducted. Comparison of capillary pressure curves from mercury penetration and semi-permeable plate is presented to establish the conversion between MNR T2 spectrum and capillary pressure curve. This provides a new method for log interpretation of complex pore structures and low resistivity hydrocarbon reservoir.

Key words: sandstone, MNR, semi-permeable plate, capillary pressure

CLC Number: