新疆石油地质 ›› 2008, Vol. 29 ›› Issue (3): 361-363.

• 应用技术 • 上一篇    下一篇

测井资料在储集层构型界面识别中的应用——以哈德 4 油田东河砂岩为例

焦翠华1, 徐怀民1, 王海更1, 刘太勋1, 昌伦杰2, 牛玉杰2   

  1. 1.中国石油大学资源与信息学院, 北京102249;
    2.中国石油塔里木油田分公司勘探开发研究院, 新疆库尔勒841000
  • 收稿日期:2008-01-23 发布日期:2020-08-19
  • 作者简介:焦翠华(1961-), 女, 吉林白山人, 教授, 地球物理测井,(Tel)010-89734600(E-mail)jiaocuihua1@sina.com.

Application of Well-Log Information to Recognition of Reservoir Architectural Boundary Surfaces—An example from Donghe sandstone in Hade-4 oil field

JIAO Cui-hua1, XU Huai-min1, WANG Hai-geng1, LIU Tai-xun1, CHANG Lun-jie2, NIU Yu-jie2   

  1. 1. Institute of Resources and Information, China University of Petroleum, Beijing 102249, China;
    2. Research Institute of Exploration and Development, Tarim Oilfield Company, PetroChina, Korla, Xinjiang 841000, China
  • Received:2008-01-23 Published:2020-08-19

摘要: 倾角测井资料具有纵向分辨率高和连续性好的特点, 在哈德4 油田东河砂岩的露头、岩心分析标定基础上,根据自然伽马、自然电位和电阻率测井曲线的幅度、形状、接触关系, 结合倾角测井资料处理解释成果, 确定了研究区储集层六级构型界面的测井响应特征和模式, 实现了单井的构型界面的识别, 为构型单元的精细研究奠定了基础。

关键词: 构型, 界面, 东河砂岩, 测井识别

Abstract: Diplog data are characterized by high vertical distinguishability and good consistency. Based on the core and outcrop analyses of Donghe sandstone in Hade-4 oil field, integrated with GR, SP and Rt log curves and dip-log interpretation result, log responses and modes of six-grade architectural boundary surfaces in the studied area are given in this paper, thus realizing the recognition of single well architectural boundary surface for the sake of detailed research of the architectural elements.

Key words: architectural element, boundary surface, Donghe sandstone, well log, recognition

中图分类号: