新疆石油地质 ›› 2010, Vol. 31 ›› Issue (3): 330-331.

• 讨论与争鸣 • 上一篇    下一篇

一种基于“一点法”的气井产能试井资料处理方法

李进1, 马汤日1, 杨志华2   

  1. 1.中国石油 西南油气田公司 勘探开发研究院,成都 610000;
    2.中国石油 大庆油田物资公司,黑龙江 大庆 163453
  • 收稿日期:2009-10-12 修回日期:2010-02-04 发布日期:2020-09-17
  • 作者简介:李进(1980-),男,四川南充人,工程师,硕士,油气田开发,(Tel)13550319992(E-mail)jin_li@petrochina.com.cn.

One Point-Based Method for Data Processing of Gas Well Deliverability Test

LI Jin1, MA Yang1, YANG Zhi-hua2   

  1. 1. Research Institute of Exploration and Development, Southwest Oil-Gas Field Company, PetroChina, Chengdu, Sichuan 610000, China;
    2. Material Supply Company, Daqing Oilfield Company Ltd., PetroChina, Daqing, Heilongjiang 163453, China
  • Received:2009-10-12 Revised:2010-02-04 Published:2020-09-17

摘要: 在实际应用“一点法”产能公式时,往往算出的气井无阻流量和产能测试算出的无阻流量相差比较大,并且是偏大还是偏小都无规律可循。究其原因,是因为即使是同一气藏中不同的气井都有不同的α 值,并且差别比较大,如果使用一个固定的α 值,势必会引起极大误差。在经过关井进行压力恢复测试并了解地层参数的情况下,可以求出α值,再利用“一点法”产能公式计算气井无阻流量就比较准确。

关键词: 气井, 产能, 公式, 无阻流量, 一点法

Abstract: The open flow potential from one-point method for calculation of gas well deliverability tends to be larger than that from the deliverability equation, and the result is irregular. The study shows that only giving one value of alpha in calculation must cause big error. The alpha value can be obtained by shut-in well pressure build-up test and available formation parameters, thus the open flow potential of a gas well given by one-point deliverability equation is more accurate.

Key words: gas well, productivity, deliverability, equation, formula, open flow potential, open flow capacity. one-point method

中图分类号: