新疆石油地质 ›› 2023, Vol. 44 ›› Issue (3): 365-374.doi: 10.7657/XJPG20230315

• 应用技术 • 上一篇    下一篇

油气藏产量旋回泛函数学模型的建立及应用

门海文1(), 张静1, 魏海军1, 赵阳2, 高文君1()   

  1. 1.中国石油 吐哈油田分公司 勘探开发研究院,新疆 哈密 839009
    2.中国石油国际勘探开发有限公司(哈萨克斯坦) PK公司,哈萨克斯坦 阿拉木图 050059
  • 收稿日期:2022-10-28 修回日期:2022-11-08 出版日期:2023-06-01 发布日期:2023-05-19
  • 通讯作者: 高文君(1971-),男,陕西乾县人,高级工程师,油气田开发,(Tel)0902-2763176(E-mail)gaowj7132@petrochina.com.cn
  • 作者简介:门海文(1988-),男,湖北洪湖人,工程师,油气田开发,(Tel)0902-2761051(E-mail)menhwkt@petrochina.com.cn
  • 基金资助:
    中国石油科技重大专项(2017E-0407)

Establishment and Application of Functional Mathematical Model for Production Cycle of Oil and Gas Reservoirs

MEN Haiwen1(), ZHANG Jing1, WEI Haijun1, ZHAO Yang2, GAO Wenjun1()   

  1. 1. Research Institute of Exploration and Development, Tuha Oilfield Company, PetroChina, Hami, Xinjiang 839009, China
    2. PK Company, China National Oil and Gas Exploration and Development Company Limited (Kazakhstan), CNPC, Almaty 050059, Kazakhstan
  • Received:2022-10-28 Revised:2022-11-08 Online:2023-06-01 Published:2023-05-19

摘要:

在系统梳理油气藏产量旋回数学模型的基础上,引入泛函产量递减通式,替换广义产量全过程数学模型中的递减函数,不需要根据油气藏驱动类型和渗流特征确定递减函数;考虑到广义产量全过程数学模型可积分,对其递增函数项表达式进行归纳,形成了3类递增函数表达式。新的广义产量全过程数学模型在复合时间和待定参数取不同值时,不仅可以转化为各类产量旋回基础数学模型,而且还能形成其他新的产量旋回数学模型,具备了产量全过程数学模型的通式及拓展性。为了降低待定参数求解难度,给出了5种最简单、最常见的复合时间关系式和产量旋回泛函数学模型求解方法。实例应用效果好,值得在其他油气藏进一步推广应用。

关键词: 油气藏, 产量旋回数学模型, 复合时间, 递增函数, 泛函数, 通式, 求解方法

Abstract:

The mathematical models for production cycle of oil and gas reservoirs were reviewed systematically. On this basis, the generalized functional production decline formula was introduced to replace the decline function in the generalized whole-process mathematical model for production cycle, and it is no longer necessary to determine the decline function according to the driving type and flow characteristics of the oil and gas reservoirs. Meanwhile, considering that the generalized whole-process mathematical model for production cycle can be integrated, the expressions of its increasing function items were summarized to form three types of increasing function expressions. When the composite time and undetermined parameters take different values, the new generalized whole-process mathematical model for production cycle can not only be converted into the basic mathematical models for various production cycles, but also form other new mathematical models for production cycle, possessing the general formula and extensibility in the whole-process mathematical model for production cycle. In order to reduce the difficulty in solving the undetermined parameters, five simplest and most common methods for solving the composite time formula and functional mathematical model for production cycle are given. The satisfactory application results verify that the new model is worthy of promotion in other oil and gas reservoirs.

Key words: oil and gas reservoir, mathematical model for production cycle, composite time, increasing function, functional, general formula, solution method

中图分类号: