新疆石油地质

新疆石油地质 ›› 2009, Vol. 30 ›› Issue (1): 121-123.

• 应用技术 • 上一篇    下一篇

基于均匀设计的自动剩余静校正方法

李丽1, 陈秀娟2, 井西利1   

  1. 1.燕山大学理学院,河北秦皇岛066004;
    2.中国石油大庆油田有限责任公司物探研究所,黑龙江大庆163357
  • 出版日期:2009-02-01 发布日期:2020-08-21
  • 作者简介:李丽（1965-）,女,黑龙江尚志人,高级实验师,地震资料处理与解释,（Tel）0335-8061734（E-mail）sljingxl@ysu.edu.cn.
  • 基金资助:
    国家自然科学基金项目三维地震调向接收层析成像方法研究（40374048）资助

A Method for Automatic Residual Static Corrections Based on Uniform Design

LI Li1, CHEN Xiu-juan2, JING Xi-li1   

  1. 1. Yanshan University, Qinhuangdao, Hebei 066004, China;
    2. Daqing Institute of Geophysics, Daqing, Heilongjiang 163357, China
  • Online:2009-02-01 Published:2020-08-21

PDF

205

摘要： 基于均匀试验设计方法,提出了一种具有较高计算效率的自动剩余静校正算法。该算法利用均匀试验设计方法在庞大的解空间中确定候选解,利用模拟退火规则来选择候选解,从而用少量的计算就能使候选解在模型空间分布更加均匀,提高搜寻全局最优解的速度。同时采用模型的不同分量的温度参数和退火过程的选取方法,使退火过程具有自适应的特点。该方法克服了常规模拟退火方法所具有的寻优空间不均匀以及不同模型分量的退火过程完全相同的缺陷。通过实际地震资料的计算证明,该方法是合理、有效的。

关键词: 静校正, 模拟退火, 均匀设计

Abstract: The uniform design-based algorithm developed for dealing with residual static corrections is used to determine the candidate solution in huge resolving space, integrated with simulated annealing approach, in order to increase the speed of searching for the global optimized solution through more uniform distribution of candidate solution in the model space. Also, selecting the temperature parameters and the annealing processes of different model components allows the annealing process to be of adaptive feature. This new algorithm overcomes the shortcomings of the conventional simulated annealing method, such as non-uniform optimizing space and same annealing process in different model components. The case study from seismic data shows that the algorithm proposed in this paper is more reasonable and efficient than the conventional simulated annealing method.

Key words: static correction, simulated annealing, uniform design

中图分类号: