新疆石油地质 ›› 2001, Vol. 22 ›› Issue (5): 426-428.

• • 上一篇    下一篇

水驱特征曲线与产量预测模型的联合应用

王俊魁   

  1. 中国石油大庆油田子公司勘探开发研究院,黑龙江大庆 163712
  • 收稿日期:2001-03-20 出版日期:2001-10-01 发布日期:2020-09-27
  • 作者简介:王俊魁(1940-),男,高级工程师,油藏工程。

A Joint Application of Displacement Curve and Production Prediction Model

WANG Jun-kui   

  • Received:2001-03-20 Online:2001-10-01 Published:2020-09-27
  • About author:WANG Jun-kui(1940-), Male, Reservoir Engineering, Research Institute of Exploration and Development, Daqing Oilfield Company, Daqing, Heilongjiang 163712, China

摘要: 介绍了甲型和丙型水驱特征曲线及产量预测模型的基本关系式;并将水驱特征曲线与产量预测模型进行联立求解,建立了含水率与开发时间之间的函数关系式,同时给出了不同开发年限的含水率、年产油量与累积采油量等各项指标的计算方法。经萨玛特洛尔油田的实例计算应用,认为该方法用于油田开发动态预测,既解决了水驱特征曲线预测中缺少时间因素的问题,又解决了产量预测模型中缺少含水率的问题。

关键词: 水驱, 驱替特征曲线, 产量, 预测, 模型, 应用

Abstract: The basic correlation of Models for Type A and Type C displacement curve and production prediction are presented, and the solutions for these models have been found simultaneously,followed by developing a functional correlation of water cut vs. production history(t). Meanwhile, the methods for calculating water cut, annual oil production rate and accumulative production, etc. are provided. By applying them into Samaterol oilfield, it is indicated that the methods can be well used in performance prediction of an oilfield development, because such problems without time factor in curve prediction model and without water cut in production prediction model have been all solved.

Key words: water drive, displacement curve, production, prediction, model, application

中图分类号: