Xinjiang Petroleum Geology ›› 2021, Vol. 42 ›› Issue (4): 437-443.doi: 10.7657/XJPG20210406

• RESERVOIR ENGINEERING • Previous Articles     Next Articles

Inter-Fracture and Inter-Section Interference Modeling for Staged and Clustered Fracturing Stimulation in Horizontal Wells: A Case Study on Reservoirs of Badaowan Formation in Wellblock Ji 7 in Changji Oilfield

CHENG Ning1a(), GUO Xuyang2(), WEI Pu1b, HUANG Lei2, WANG Liang1a   

  1. 1. PetroChina Xinjiang Oilfield Company, a.Research Institute of Engineering Technology; b.Shixi Oilfield Operation District, Karamay, Xinjiang 834000, China
    2. China University of Petroleum, a.State Key Laboratory of Petroleum Resources and Prospecting; b.School of Petroleum Engineering, Beijing 102249, China
  • Received:2020-05-21 Revised:2020-07-09 Online:2021-08-01 Published:2021-08-09
  • Contact: GUO Xuyang E-mail:cning-kcscy@petrochina.com.cn;xguo@cup.edu.cn

Abstract:

In developing the reservoir of the Badaowan formation in Wellblock Ji 7 in Changji oilfield, the results of hydraulic fracturing stimulation in vertical wells are unsatisfactory, and the post-fracturing productivity is limited, so that it is necessary to apply multi-stage fracturing stimulation in horizontal wells. According to the geomechanical characteristics of the reservoir in the Badaowan formation in Wellblock Ji 7, a non-planar artificial fracture propagation model was established using the extended finite element method. By taking into account inter-fracture interference while multiple clusters of fracture propagating simultaneously and the inter-section interference during staged fracturing stimulation, the model characterizes the non-planar fracture propagation in horizontal wells drilled in the Badaowan formation in Wellblock Ji 7. The results show that the inter-fracture interference induced in a section inhibits the half-length of middle fracture clusters, but makes a wider and longer half-length of the fractures on both sides; the inter-fracture interference and the inter-cluster interference make fracture propagation non-planar, and show a certain curvature in geometrical morphology. According to comparative analysis of fracturing data and microseismic data, the modeling results are consistent with the measured data, proving that good application results have been obtained in target zones. A multi-stage fracturing test was carried out in the Badaowan formation in a horizontal well in Wellblock Ji 7. The daily post-fracturing oil production of the horizontal well was 7.8 times that of a vertical well in the same well block, indicating a significant development effect.

Key words: Changji oilfield, Badaowan formation, horizontal well, staged and clustered fracturing stimulation, hydraulic fracture, numerical simulation, geomechanical characteristic, inter-fracture interference, inter-section interference

CLC Number: