新疆石油地质 ›› 2005, Vol. 26 ›› Issue (1): 77-79.

• 油藏工程 • 上一篇    下一篇

油田开发后期的相控建模

吕晓光1,2, 张永庆2, 陈兵2   

  1. 1.中国石油国际公司 印度尼西亚项目 雅加达 12930 印度尼西亚;
    2.中国石油 大庆油田有限责任公司 勘探开发研究院,黑龙江 大庆 163712
  • 收稿日期:2004-07-16 出版日期:2005-02-01 发布日期:2020-08-24
  • 作者简介:吕晓光(1966-),黑龙江大庆人,博士,高级工程师,油田开发,(Tel)62-21-2501211.
  • 基金资助:
    国家重点基础研究发展规划(973)资助项目(G1990225-07)

Facies-Controlled Modeling for Mature Oilfield Development

LU Xiao-guang1,2, ZHANG Yong-qing2, CHEN Bing2   

  1. 1. PetroChina Internatinal in Indonesia, Jakarta 12930, Indonesia;
    2. Research Institute of Exploration an Development, Daqing Oilfield Company Lid, PetroChina, Daqing, Heilongjiang 163712, China
  • Received:2004-07-16 Online:2005-02-01 Published:2020-08-24

摘要: 采用相控建模的思路是提高储集层建模精度的关键。根据成熟开发油田的技术、信息特点,提出了沉积学微相建模与参数定量预测的思路、方法和主要步骤。对低弯度分流河道砂体开展了建模实例研究。预测结果表明,与常规的非相控参数预测相比,前者的预测结果,促进了地质概念向模型转化,建模结果更符合地下地质实际。这一思路有利于发挥地质家的经验、知识和技能,其结果将更好地发挥地质的约束作用,同时也更适合我国油藏描述的基础和实际。文中同时指出,进一步的实践中可考虑沉积学微相建模与随机参数预测结合的思路。

关键词: 油田开发后期, 相控, 建模, 地质约束, 分流, 河道, 沉积, 砂岩体

Abstract: Facies-controlled modeling facilitates great improvement of accuracy of reservoir model. Based on speeific characteristics of techniques and information from mature oilfield development, the research thought, method and key procedure of integrating depositional! microfacies modeling with facies controlled reservoir parameter prediction are proposed. A case study is made for low sinuosity of distributary channel sandbody. The result shows that compared with conventional reservoir parameter prediction, the facies-controlled model-ing has greatly promoted the conversion of geological concept to the model, bringing about more reliable and matched in-situ conditions.The study will be beneficial to employing the knowledge, experience and skill from a geologist, intensifying restriction in geology so as to better fit the practical conditions of domestic reservoir characterization for mature oilfield development. Meanwhile, integrating deposi-tional microfacies modeling with stochastic reservoir parameter prediction is advisable or recommended for further modeling practices.

Key words: mature oilfield development, facies- controll, modeling, geological constraining, distributary channel, deposition, sandbody

中图分类号: