新疆石油地质

新疆石油地质 ›› 2008, Vol. 29 ›› Issue (6): 737-739.

• 油藏工程 • 上一篇    下一篇

唐家河油田三断块储集层参数四维模型的建立

朱文春1,2, 李树庆2, 邱红3, 尹志军3, 张继春3, 袁玉涛4   

  1. 1.中国科学院地质与地球物理研究所，北京100029;
    2.中国石油大港油田第一采油厂，天津300280;
    3.中国石油大学北京 提高采收率中心，北京102249;
    4.中国石化江苏油田地质测井处，江苏扬州211600
  • 收稿日期:2008-04-11 发布日期:2020-11-20
  • 作者简介:朱文春（1958-），女，天津人，高级工程师，在读博士研究生，石油地质，（Tel）022-25922618（E-mail）zhuwchun@petrochina.com.cn.
  • 基金资助:
    中国石油有限公司“十五”科技攻关项目

4D Model for Reservoir Parameters in Faultblock-3 in Tangjiahe Oilfield

ZHU Wen-chun1,2, LI Shu-qing2, QIU Hong3, YIN Zhi-jun3, ZHANG Ji-chun3, YUAN Yu-tao4   

  1. 1. Institute of Geology and Geophysics, CAS, Beijing 100029, China;
    2. No.1 Production Plant, Dagang Oilfield Company, PetroChina, Tianjin 300280, China;
    3. Center for EOR, China University of Petroleum, Beijing 102249, China;
    4. Department of Geologic Logging, Jiangsu Oilfield Company, Sinopec, Yangzhou, Jiangsu 211600, China
  • Received:2008-04-11 Published:2020-11-20

PDF

304

摘要： 根据不同开发阶段的钻井、测井、室内驱替实验及各项生产动态资料，建立了唐家河三断块储集层物性参数随注水开发过程而变化的四维动态演化模型。1971—1982 年孔隙度、渗透率年相对减小率分别是1.63％和2.58％；1982 年后孔隙度、渗透率年相对增大率分别是1.00％和5.57％. 分析引起储集层参数在开发不同时期变化的原因主要包括：油藏温度、压力的降低、流体性质的改变及注入水动力作用所引起的岩石性质和微观结构的变化。用所建立的四维储集层参数动态仿真模型预测了不同开发阶段流动单元内部油水运动特点及剩余油分布状况，结果表明，与同期相应油水井的生产状况基本吻合。

关键词: 储集层参数, 四维模型, 动态模型, 注水开发, 唐家河, 剩余油分布

Abstract: Based on the drilling, well logging, core lab displacement experiment and various production performance data, the 4D dynamic evolution model for reservoir physical parameter changes with waterflooding process in Faultblock-3 reservoir in Tangjiahe oilfield is developed. The production history in this oilfield showed that during 1971-1982, the porosity and permeability in this reservoir relatively declined by 1.63% and 2.58%, respectively; after 1982, the porosity and permeability relatively increased by 1.00% and 5.57%, respectively. The reasons for the changes of rock property and microscopic structure caused during different exploitation periods mainly include: reservoir temperature and pressure drawdown, fluid property change and injected water hydrodynamism. With this 4D model, this paper predicts the oil-water behavior and remained oil distribution status within producing units during different development stages, the results indicate that they are close to actual production status of corresponding producers and injectors at that time.

Key words: reservoir parameter, 4D model, dynamic model, waterflooding, Tangjiahe, remained oil distribution

中图分类号: