新疆石油地质 ›› 2010, Vol. 31 ›› Issue (5): 514-516.

• 油藏工程 • 上一篇    下一篇

缝洞型碳酸盐岩油藏耦合数值模拟新方法

康志江1,2   

  1. 1.中国石化 勘探开发研究院,北京 100083;
    2.中国地质大学,武汉 430074
  • 收稿日期:2010-03-15 修回日期:2010-03-15 发布日期:2020-10-21
  • 作者简介:康志江(1969-),男,辽宁北宁人,高级工程师,在读博士研究生,油田开发,(Tel)010-82282478(E-mail)kangzj@pepris.com.
  • 基金资助:
    国家973项目(2006CB202405)

New Method of Coupling Numerical Simulation and Application to Fracture-Cavern Carbonate Reservoir

KANG Zhi-jiang   

  1. 1. Research Institute of Petroleum Exploration and Development, Sinopec, Beijing 100083, China;
    2. China University of Geosciences, Wuhan, Hubei 430074, China
  • Received:2010-03-15 Revised:2010-03-15 Published:2020-10-21

摘要: 首次提出洞穴内两相流体动力学计算方法,并建立了洞穴与溶孔间的界面处理方法,创建了缝洞型油藏洞穴-溶孔耦合型两相流数学模型,研究了有限体积数值解法,编写了计算机应用程序,成功地应用于塔河缝洞型油藏注水驱油机理研究,首次提出了多井缝洞单元的注水开发模式,现场实施后增油效果显著。

关键词: 缝洞型油藏, 数值模拟, 数学模型, 缝洞单元注水模式

Abstract: This paper firstly proposes the calculation method for inner cavern two-phase flow dynamics, develops the interfacial processing method between cavern and solution pore and builds up the cavern-solution pore coupling two-phase mathematics model for fracturecavern reservoirs, including related finite volume numerical solution and PC-applied program. In successful application to study of water injection oil displacement mechanism of Tahe fracture-cavern reservoir in Tarim basin, the waterflooding process of multi-well fracturecavern element is also proposed firstly, and the oil incremental effect is obvious after field implementation.

Key words: fracture-cavern reservoir, numerical simulation, mathematics model, fracture-cavern element waterflooding process

中图分类号: